EDAboard.com | EDAboard.de | EDAboard.co.uk | WTWH Media

Ballot Invitation for VHDL Standard (IEEE 1076)

Ask a question - edaboard.com

elektroda.net NewsGroups Forum Index - VHDL Language - Ballot Invitation for VHDL Standard (IEEE 1076)

Jim Lewis
Guest

Fri Feb 24, 2017 11:14 pm   



Hi,
Below are the instructions to signup to ballot on 1076-2017

More about the 1076 WG see:
http://www.eda-twiki.org/cgi-bin/view.cgi/P1076/WebHome
http://www.eda-twiki.org/cgi-bin/view.cgi/P1076/MeetingMinutes
http://www.eda-twiki.org/cgi-bin/view.cgi/P1076/CollectedRequirements

Best Regards,
Jim Lewis
IEEE 1076 (VHDL) Working Group Chair
SynthWorks Director of Training
OSVVM co-founder and chief architect

***** ENROLLMENT INSTRUCTIONS *****

Go directly to:

https://development.standards.ieee.org/my-site/open-ballot-invitations

Or, follow this process:

1. Log onto myProject; click the link for myBallot.
2. Click the link for myBallot Control Panel (if applicable); click the link for "Show/Join Open Ballot Invitations":
https://development.standards.ieee.org/my-site/open-ballot-invitations
3. Scroll down until you find the open ballot group of interest to you; then scroll over to the right margin and click
?join? under the ?Actions? column.
4. Select a classification category and click ?OK? at the bottom of the screen. You will receive an on-screen
confirmation that you successfully joined the group.

If you are not an IEEE SA Member, you can either enroll in a single ballot by paying a per-ballot fee or you can join
the IEEE SA by choosing an option link below. Joining the IEEE SA entitles you to participate in as many sponsor ballots
as you like for the year.

OPTION 1 - I am already an IEEE Member and I want to add Standards Association Membership. Go to:
https://myieeemembership.ieee.org/renewal/RenewalLogin
OPTION 2 - I am not an IEEE Member but would like to enroll in both IEEE and IEEE Standards Association. Go to:
https://webapps2.ieee.org/member/Member
OPTION 3 - I am not interested in becoming an IEEE Member, however I would like to enroll as a Standards Association
Member only. Go to: http://standards.ieee.org/sa-mem/join.html

============================================
OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS
============================================
Balloting group members are selected to vote on the acceptability of a new or revised standard, or on the reaffirmation
of a published standard submitted by the Sponsor; based on interest in and commitment to reviewing and voting on a
specific existing or proposed standard.

Once the document is ready to be balloted, you will receive notification via email. You will typically have 30 days to
review the document and return the ballot with your vote. By agreeing to participate in this ballot you have an
*obligation* to respond. Failure to return a completed ballot may disqualify you from participating in future ballots.

Weng Tianxiang
Guest

Wed Nov 15, 2017 6:08 pm   



On Friday, February 24, 2017 at 1:14:39 PM UTC-8, Jim Lewis wrote:
Quote:
Hi,
Below are the instructions to signup to ballot on 1076-2017

More about the 1076 WG see:
http://www.eda-twiki.org/cgi-bin/view.cgi/P1076/WebHome
http://www.eda-twiki.org/cgi-bin/view.cgi/P1076/MeetingMinutes
http://www.eda-twiki.org/cgi-bin/view.cgi/P1076/CollectedRequirements

Best Regards,
Jim Lewis
IEEE 1076 (VHDL) Working Group Chair
SynthWorks Director of Training
OSVVM co-founder and chief architect

***** ENROLLMENT INSTRUCTIONS *****

Go directly to:

https://development.standards.ieee.org/my-site/open-ballot-invitations

Or, follow this process:

1. Log onto myProject; click the link for myBallot.
2. Click the link for myBallot Control Panel (if applicable); click the link for "Show/Join Open Ballot Invitations":
https://development.standards.ieee.org/my-site/open-ballot-invitations
3. Scroll down until you find the open ballot group of interest to you; then scroll over to the right margin and click
?join? under the ?Actions? column.
4. Select a classification category and click ?OK? at the bottom of the screen. You will receive an on-screen
confirmation that you successfully joined the group.

If you are not an IEEE SA Member, you can either enroll in a single ballot by paying a per-ballot fee or you can join
the IEEE SA by choosing an option link below. Joining the IEEE SA entitles you to participate in as many sponsor ballots
as you like for the year.

OPTION 1 - I am already an IEEE Member and I want to add Standards Association Membership. Go to:
https://myieeemembership.ieee.org/renewal/RenewalLogin
OPTION 2 - I am not an IEEE Member but would like to enroll in both IEEE and IEEE Standards Association. Go to:
https://webapps2.ieee.org/member/Member
OPTION 3 - I am not interested in becoming an IEEE Member, however I would like to enroll as a Standards Association
Member only. Go to: http://standards.ieee.org/sa-mem/join.html

============================================
OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS
============================================
Balloting group members are selected to vote on the acceptability of a new or revised standard, or on the reaffirmation
of a published standard submitted by the Sponsor; based on interest in and commitment to reviewing and voting on a
specific existing or proposed standard.

Once the document is ready to be balloted, you will receive notification via email. You will typically have 30 days to
review the document and return the ballot with your vote. By agreeing to participate in this ballot you have an
*obligation* to respond. Failure to return a completed ballot may disqualify you from participating in future ballots.


Hi Jim,

Your post was made On Friday, February 24, 2017 at 1:14:39 PM UTC-8.

I want to know whether or not the ballot for 2007 is finished?

Weng

elektroda.net NewsGroups Forum Index - VHDL Language - Ballot Invitation for VHDL Standard (IEEE 1076)

Ask a question - edaboard.com

Arabic version Bulgarian version Catalan version Czech version Danish version German version Greek version English version Spanish version Finnish version French version Hindi version Croatian version Indonesian version Italian version Hebrew version Japanese version Korean version Lithuanian version Latvian version Dutch version Norwegian version Polish version Portuguese version Romanian version Russian version Slovak version Slovenian version Serbian version Swedish version Tagalog version Ukrainian version Vietnamese version Chinese version Turkish version
EDAboard.com map