Goto page Previous 1, 2, 3 ... 12, 13, 14
Wild_Bill
Guest
Tue Feb 23, 2010 3:24 pm
Scissors seem to be popular, or used to be, with some electrical-types that
came came over to the USA from the Mediterranean area to work on a
manufacuring plant expansion.
Those notches in the scissor are used for stripping soft insulation (in SO,
SJ multi-conductor cords) by pulling the wire over the notch with a thumb
pressed on the wire, but it just seemed a little crude to me. Not effective
at all for tough insulation.
There are numerous special knife blades and sheath rippers for removing
outer jackets from cabling, so I couldn't figure out why electricians would
need to use scissors for anything in particular.. cutting off a length of
tape instead of just tearing it? Not likely.
--
Cheers,
WB
..............
"Dave Plowman (News)" <dave_at_davenoise.co.uk> wrote in message
news:50ee097dbcdave_at_davenoise.co.uk...
Quote:
In article <1wMgn.344441$IU1.54940_at_en-nntp-04.dc1.easynews.com>,
Wild_Bill <wb_wildbill_at_XSPAMyahoo.com> wrote:
This eBay seller has a number of good quality cutters and pliers. I
haven't bought from this seller, I just happened to find Hunter pliers
here (I'm not this seller).
http://shop.ebay.com/dbmcinc/m.html?_nkw=&_armrs=1&_from=&_ipg=
They list 'electrician's' scissors. Why would an electrician need scissors
- or a special type?
--
*You! Off my planet!
Dave Plowman dave_at_davenoise.co.uk London SW
To e-mail, change noise into sound.
Pomegranate Bastard
Guest
Tue Feb 23, 2010 4:10 pm
On Tue, 23 Feb 2010 05:40:25 -0800, life imitates life
<pasticcio_at_thebarattheendoftheuniverse.org> wrote:
Quote:
On Tue, 23 Feb 2010 09:37:16 +0000, Pomegranate Bastard
pommyB_at_dsl.pipex.com> wrote:
It's about the correct use of the English language.
No. Its about fuck you, I'll write and speak any way I wish, you TOTAL
piece of shit. Now fuck off, and die, boy!
Just as I expected, a faeces reference, but you forgot to use
"retard". You're slipping.
Anyway, is that any way for a christian to behave? I wonder what your
fellow christians think.
krw
Guest
Tue Feb 23, 2010 4:52 pm
On Mon, 22 Feb 2010 22:17:37 -0800, life imitates life
<pasticcio_at_thebarattheendoftheuniverse.org> wrote:
Quote:
On Mon, 22 Feb 2010 22:30:59 -0600, krw <krw_at_att.bizzzzzzzzzzz> wrote:
On Mon, 22 Feb 2010 17:21:03 -0800, life imitates life
pasticcio_at_thebarattheendoftheuniverse.org> wrote:
On Mon, 22 Feb 2010 11:20:10 -0600, krw <krw_at_att.bizzzzzzzzzzz> wrote:
On Mon, 22 Feb 2010 10:14:58 +0000, Pomegranate Bastard
pommyB_at_dsl.pipex.com> wrote:
On Sun, 21 Feb 2010 14:13:54 -0800, life imitates life
pasticcio_at_thebarattheendoftheuniverse.org> wrote:
On Sun, 21 Feb 2010 13:14:35 -0800 (PST), Greegor <greegor47_at_gmail.com
wrote:
On Feb 20, 6:11 am, life imitates life
pastic...@thebarattheendoftheuniverse.org> wrote:
On Sat, 20 Feb 2010 10:02:54 +0000 (GMT), "Dave Plowman (News)"
d...@davenoise.co.uk> wrote:
You could also learn when stainless steel became commonplace.
I also know more about stainless steel than you ever will as well. My
first job out of high school was polishing stainless plates 2 inches
thick that got rolled up into huge food processing tanks. We did a lot
of exotics as well.
I do not expect a ditz that thinks steel wire is the right test for
side cutter efficacy to know what surface quality is about though, much
less alloy composition.
Food processing tanks with TWO INCH thick walls?
Now EVERYBODY knows that you are an outright liar.
When the tank wall is formed from a plate that is 20' wide by 30' long
and is meant for a vessel that will be under pressure, it does. You
retarded little piece of shit.
Try calling up Proctor and Gamble in Cincinnati and telling them that
none of their tanks have two inch thick walls.
You are about as fucking stupid as it gets, fuckhead.
You are ineffectual twit and your own realization
of that that frustrates and angers you.
I have done more in the last week to make the world a better place than
you will in your entire, pathetic life.
You could try making it even better. Why don't you arrange an
immediate meeting your mate "god"? I'm sure he'll be pleased to meet
you.
We certainly would.
snip...
Cry, pussies.
You wouldn't know anything about pussies, AlwaysWrong.
I also do not want to know anything about you either.
Isn't AlwaysWrong cute when she's mad? How's mommy's hamper doing
DimBulb?
Quote:
You need to learn what the word 'connotation' means.
You need to be right, at least once in your life.
Dave Plowman (News)
Guest
Tue Feb 23, 2010 5:02 pm
In article <dyRgn.359478$H15.283170_at_en-nntp-02.dc1.easynews.com>,
Wild_Bill <wb_wildbill_at_XSPAMyahoo.com> wrote:
Quote:
Scissors seem to be popular, or used to be, with some electrical-types
that came came over to the USA from the Mediterranean area to work on a
manufacuring plant expansion.
Right. Didn't know that.
Quote:
Those notches in the scissor are used for stripping soft insulation (in
SO, SJ multi-conductor cords) by pulling the wire over the notch with a
thumb pressed on the wire, but it just seemed a little crude to me. Not
effective at all for tough insulation.
Indeed. There are similar but tougher devices that work in the same way.
Quote:
There are numerous special knife blades and sheath rippers for removing
outer jackets from cabling, so I couldn't figure out why electricians
would need to use scissors for anything in particular.. cutting off a
length of tape instead of just tearing it? Not likely.
In the UK the common house cabling is called Twin and Earth, which is
solid core. The ECC is bare and the whole cover in an outer sheath. All
you need to do to remove the outer is to cut a slot in it at the start
with a knife, then pull the ECC down the sheath at right angles. Which
saves any possibility of damage to the 'live' conductor's insulation.
Quote:
--
Cheers,
WB
.............
Quote:
"Dave Plowman (News)" <dave_at_davenoise.co.uk> wrote in message
news:50ee097dbcdave_at_davenoise.co.uk...
In article <1wMgn.344441$IU1.54940_at_en-nntp-04.dc1.easynews.com>,
Wild_Bill <wb_wildbill_at_XSPAMyahoo.com> wrote:
This eBay seller has a number of good quality cutters and pliers. I
haven't bought from this seller, I just happened to find Hunter pliers
here (I'm not this seller).
http://shop.ebay.com/dbmcinc/m.html?_nkw=&_armrs=1&_from=&_ipg=
They list 'electrician's' scissors. Why would an electrician need scissors
- or a special type?
--
*You! Off my planet!
Dave Plowman dave_at_davenoise.co.uk London SW
To e-mail, change noise into sound.
--
*Geeks shall inherit the earth *
Dave Plowman dave_at_davenoise.co.uk London SW
To e-mail, change noise into sound.
Michael A. Terrell
Guest
Tue Feb 23, 2010 5:25 pm
"Dave Plowman (News)" wrote:
Quote:
In article <dyRgn.359478$H15.283170_at_en-nntp-02.dc1.easynews.com>,
Wild_Bill <wb_wildbill_at_XSPAMyahoo.com> wrote:
Scissors seem to be popular, or used to be, with some electrical-types
that came came over to the USA from the Mediterranean area to work on a
manufacuring plant expansion.
Right. Didn't know that.
Those notches in the scissor are used for stripping soft insulation (in
SO, SJ multi-conductor cords) by pulling the wire over the notch with a
thumb pressed on the wire, but it just seemed a little crude to me. Not
effective at all for tough insulation.
Indeed. There are similar but tougher devices that work in the same way.
There are numerous special knife blades and sheath rippers for removing
outer jackets from cabling, so I couldn't figure out why electricians
would need to use scissors for anything in particular.. cutting off a
length of tape instead of just tearing it? Not likely.
In the UK the common house cabling is called Twin and Earth, which is
solid core. The ECC is bare and the whole cover in an outer sheath. All
you need to do to remove the outer is to cut a slot in it at the start
with a knife, then pull the ECC down the sheath at right angles. Which
saves any possibility of damage to the 'live' conductor's insulation.
That sounds like 'Romex'.
--
Greed is the root of all eBay.
Pomegranate Bastard
Guest
Tue Feb 23, 2010 6:23 pm
On Tue, 23 Feb 2010 09:52:18 -0600, krw <krw_at_att.bizzzzzzzzzzz> wrote:
Quote:
On Mon, 22 Feb 2010 22:17:37 -0800, life imitates life
pasticcio_at_thebarattheendoftheuniverse.org> wrote:
On Mon, 22 Feb 2010 22:30:59 -0600, krw <krw_at_att.bizzzzzzzzzzz> wrote:
On Mon, 22 Feb 2010 17:21:03 -0800, life imitates life
pasticcio_at_thebarattheendoftheuniverse.org> wrote:
On Mon, 22 Feb 2010 11:20:10 -0600, krw <krw_at_att.bizzzzzzzzzzz> wrote:
On Mon, 22 Feb 2010 10:14:58 +0000, Pomegranate Bastard
pommyB_at_dsl.pipex.com> wrote:
On Sun, 21 Feb 2010 14:13:54 -0800, life imitates life
pasticcio_at_thebarattheendoftheuniverse.org> wrote:
On Sun, 21 Feb 2010 13:14:35 -0800 (PST), Greegor <greegor47_at_gmail.com
wrote:
On Feb 20, 6:11 am, life imitates life
pastic...@thebarattheendoftheuniverse.org> wrote:
On Sat, 20 Feb 2010 10:02:54 +0000 (GMT), "Dave Plowman (News)"
d...@davenoise.co.uk> wrote:
You could also learn when stainless steel became commonplace.
I also know more about stainless steel than you ever will as well. My
first job out of high school was polishing stainless plates 2 inches
thick that got rolled up into huge food processing tanks. We did a lot
of exotics as well.
I do not expect a ditz that thinks steel wire is the right test for
side cutter efficacy to know what surface quality is about though, much
less alloy composition.
Food processing tanks with TWO INCH thick walls?
Now EVERYBODY knows that you are an outright liar.
When the tank wall is formed from a plate that is 20' wide by 30' long
and is meant for a vessel that will be under pressure, it does. You
retarded little piece of shit.
Try calling up Proctor and Gamble in Cincinnati and telling them that
none of their tanks have two inch thick walls.
You are about as fucking stupid as it gets, fuckhead.
You are ineffectual twit and your own realization
of that that frustrates and angers you.
I have done more in the last week to make the world a better place than
you will in your entire, pathetic life.
You could try making it even better. Why don't you arrange an
immediate meeting your mate "god"? I'm sure he'll be pleased to meet
you.
We certainly would.
snip...
Cry, pussies.
You wouldn't know anything about pussies, AlwaysWrong.
I also do not want to know anything about you either.
Isn't AlwaysWrong cute when she's mad? How's mommy's hamper doing
DimBulb?
Perhaps you should ease off a bit. You might make her cry and run off
in a huff. :=)
Quote:
You need to learn what the word 'connotation' means.
You need to be right, at least once in your life.
Dave Plowman (News)
Guest
Tue Feb 23, 2010 7:09 pm
In article <4B84015D.EBB631ED_at_earthlink.net>,
Michael A. Terrell <mike.terrell_at_earthlink.net> wrote:
Quote:
In the UK the common house cabling is called Twin and Earth, which is
solid core. The ECC is bare and the whole cover in an outer sheath. All
you need to do to remove the outer is to cut a slot in it at the start
with a knife, then pull the ECC down the sheath at right angles. Which
saves any possibility of damage to the 'live' conductor's insulation.
Quote:
That sounds like 'Romex'.
Think it is. Has a *very* long life if not overloaded - provided vermin
can't chew the PVC. ;-)
--
*Why do we say something is out of whack? What is a whack?
Dave Plowman dave_at_davenoise.co.uk London SW
To e-mail, change noise into sound.
krw
Guest
Wed Feb 24, 2010 12:01 am
On Tue, 23 Feb 2010 17:23:42 +0000, Pomegranate Bastard
<pommyB_at_dsl.pipex.com> wrote:
Quote:
On Tue, 23 Feb 2010 09:52:18 -0600, krw <krw_at_att.bizzzzzzzzzzz> wrote:
On Mon, 22 Feb 2010 22:17:37 -0800, life imitates life
pasticcio_at_thebarattheendoftheuniverse.org> wrote:
On Mon, 22 Feb 2010 22:30:59 -0600, krw <krw_at_att.bizzzzzzzzzzz> wrote:
On Mon, 22 Feb 2010 17:21:03 -0800, life imitates life
pasticcio_at_thebarattheendoftheuniverse.org> wrote:
On Mon, 22 Feb 2010 11:20:10 -0600, krw <krw_at_att.bizzzzzzzzzzz> wrote:
On Mon, 22 Feb 2010 10:14:58 +0000, Pomegranate Bastard
pommyB_at_dsl.pipex.com> wrote:
On Sun, 21 Feb 2010 14:13:54 -0800, life imitates life
pasticcio_at_thebarattheendoftheuniverse.org> wrote:
On Sun, 21 Feb 2010 13:14:35 -0800 (PST), Greegor <greegor47_at_gmail.com
wrote:
On Feb 20, 6:11 am, life imitates life
pastic...@thebarattheendoftheuniverse.org> wrote:
On Sat, 20 Feb 2010 10:02:54 +0000 (GMT), "Dave Plowman (News)"
d...@davenoise.co.uk> wrote:
You could also learn when stainless steel became commonplace.
I also know more about stainless steel than you ever will as well. My
first job out of high school was polishing stainless plates 2 inches
thick that got rolled up into huge food processing tanks. We did a lot
of exotics as well.
I do not expect a ditz that thinks steel wire is the right test for
side cutter efficacy to know what surface quality is about though, much
less alloy composition.
Food processing tanks with TWO INCH thick walls?
Now EVERYBODY knows that you are an outright liar.
When the tank wall is formed from a plate that is 20' wide by 30' long
and is meant for a vessel that will be under pressure, it does. You
retarded little piece of shit.
Try calling up Proctor and Gamble in Cincinnati and telling them that
none of their tanks have two inch thick walls.
You are about as fucking stupid as it gets, fuckhead.
You are ineffectual twit and your own realization
of that that frustrates and angers you.
I have done more in the last week to make the world a better place than
you will in your entire, pathetic life.
You could try making it even better. Why don't you arrange an
immediate meeting your mate "god"? I'm sure he'll be pleased to meet
you.
We certainly would.
snip...
Cry, pussies.
You wouldn't know anything about pussies, AlwaysWrong.
I also do not want to know anything about you either.
Isn't AlwaysWrong cute when she's mad? How's mommy's hamper doing
DimBulb?
Perhaps you should ease off a bit. You might make her cry and run off
in a huff. :=)
DimBulb running off? Permanently? Yeah, that would really break my
heart.
Proteus IIV
Guest
Wed Feb 24, 2010 1:10 am
On Feb 23, 6:01 pm, krw <k...@att.bizzzzzzzzzzz> wrote:
Quote:
On Tue, 23 Feb 2010 17:23:42 +0000, Pomegranate Bastard
QUITE A ROMANCE YOU TWO HAVE GOING ON HERE
I AM PROTEUS
life imitates life
Guest
Wed Feb 24, 2010 2:19 am
On Tue, 23 Feb 2010 15:10:07 -0800 (PST), Proteus IIV
<proteusiiv_at_gmail.com> wrote:
Quote:
On Feb 23, 6:01 pm, krw <k...@att.bizzzzzzzzzzz> wrote:
On Tue, 23 Feb 2010 17:23:42 +0000, Pomegranate Bastard
QUITE A ROMANCE YOU TWO HAVE GOING ON HERE
I AM PROTEUS
I must admit. The Proteus retard finally got ONE thing right. They
are sucking each other's dicks at every turn. Pretty pathetic, they are,
actually. Bwuahahahahahahahahahahaaha!
Even the group troll knows what you two retarded fucks are about!
krw
Guest
Wed Feb 24, 2010 2:24 am
On Tue, 23 Feb 2010 17:19:27 -0800, life imitates life
<pasticcio_at_thebarattheendoftheuniverse.org> wrote:
Quote:
On Tue, 23 Feb 2010 15:10:07 -0800 (PST), Proteus IIV
proteusiiv_at_gmail.com> wrote:
On Feb 23, 6:01 pm, krw <k...@att.bizzzzzzzzzzz> wrote:
On Tue, 23 Feb 2010 17:23:42 +0000, Pomegranate Bastard
QUITE A ROMANCE YOU TWO HAVE GOING ON HERE
I AM PROTEUS
I must admit. The Proteus retard finally got ONE thing right. They
are sucking each other's dicks at every turn. Pretty pathetic, they are,
actually. Bwuahahahahahahahahahahaaha!
....and we all know you've been sucking Roy's dick for a year.
Quote:
Even the group troll knows what you two retarded fucks are about!
DimBulb and Roy, sounds like a real professional team! Don't let the
pussy bite, DimBulb.
Proteus IIV
Guest
Mon Mar 01, 2010 7:28 am
On Feb 23, 8:24 pm, krw <k...@att.bizzzzzzzzzzz> wrote:
Quote:
On Tue, 23 Feb 2010 17:19:27 -0800, life imitates life
pastic...@thebarattheendoftheuniverse.org> wrote:
On Tue, 23 Feb 2010 15:10:07 -0800 (PST), Proteus IIV
proteus...@gmail.com> wrote:
On Feb 23, 6:01 pm, krw <k...@att.bizzzzzzzzzzz> wrote:
On Tue, 23 Feb 2010 17:23:42 +0000, Pomegranate Bastard
QUITE A ROMANCE YOU TWO HAVE GOING ON HERE
I AM PROTEUS
I must admit. The Proteus retard finally got ONE thing right. They
are sucking each other's dicks at every turn. Pretty pathetic, they are,
actually. Bwuahahahahahahahahahahaaha!
...and we all know you've been sucking Roy's dick for a year.
Even the group troll knows what you two retarded fucks are about!
DimBulb and Roy, sounds like a real professional team! Don't let the
pussy bite, DimBulb.- Hide quoted text -
- Show quoted text -
FAGGOT GET ALIFE YOU ALL WISH USER ROYKEY WERE STILL HERE
I KIND OF WISH HE WERE STILL AROUND TOO
BUT HE OBVIOUSL;Y HAS BETTER ASPIRATIONS THAN WHAT YOU QUEERS HAVE IN
MIND
YOU PATHETIC SOCIOPATH
I AM PROTEUS
Goto page Previous 1, 2, 3 ... 12, 13, 14
